Pinpoint Test K : U0100: Notes
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Four Wheel Drive Systems for schematic and connector information.
Normal Operation
The TCCM sets DTC U0100 when it has not received messages from the PCM for more than 5 seconds. Other modules that require data from the PCM all set communication DTCs and may also exhibit system function concerns.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0100 | Lost Communication With ECM/PCM "A": No Sub-Type Information | Sets in continuous memory in the TCCM if powertrain data messages received from the PCM over the HS-CAN are missing for longer than 5 seconds. |
Possible Sources
- Communication concern
- Battery voltage concern
- PCM
- TCCM