Throttle Position (TP) Sensor: Installation

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty and 2019 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: when installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the engine throttle body.

NOTE: Do not use power tools.

Install the new TP sensor. Connect the electrical connector.

Torque: 27 lb.in (3 Nm)
Install the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .