LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Parking Aid - Vehicles With: Parking Aid Camera) >> Description And Operation >> Parking Aid - System Operation and Component Description >> Rear Only Parking Aid Camera BCM Network Input Messages >> Manual Zoom

Manual Zoom

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The manual zoom feature is generated by the rear parking aid camera and has one level of zoom. If the manual zoom feature is on and the vehicle is shifted out of reverse gear, the manual zoom feature is disabled and must be re-enabled the next time reverse gear is selected. When the driver turns the zoom on or off at the display, the zoom command is sent from the FCDIM or APIM through HS-CAN3 to the GWM then over HS-CAN1 to the BCM. The BCM then sends the manual zoom request message to the rear parking aid camera via the LIN circuit.

scientia non olet · About LEMON Manuals