Pinpoint Test K : U300A:01: Notes
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Power Distribution/BCM for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Steering Wheel and Column Electrical Components - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U300A:01 | Ignition Switch: General Electrical Failure | Sets when the BCM detects an invalid combination from the ignition switch input circuits, such as a voltage signal only from the ON-designated circuit, a voltage signal only from the START-designated circuit or a voltage signal from ACC and START-designated circuits at the same time. |
Possible Causes
- Wiring, terminals or connectors
- Ignition switch
- BCM