LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Steering Wheel And Column Electrical Components) >> Diagnosis And Testing >> Steering Wheel and Column Electrical Components >> Pinpoint Tests >> Pinpoint Test J : B11D9:17 >> Notes

Pinpoint Test J : B11D9:17: Notes

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Power Distribution/BCM for schematic and connector information.

Normal Operation and Fault Conditions 

The SCCM continuously monitors input voltage for correct operation. If voltage outside of defined limits is detected by the SCCM, the applicable DTC sets. DTC B11D9:17 can set if the vehicle has been recently jump started or the vehicle battery has been recently charged.

SCCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B11D9:17 Vehicle Battery: Circuit Above Threshold Sets in continuous memory if the SCCM detects battery voltage above 19 volts on the battery voltage supply circuit.

Possible Causes 

scientia non olet · About LEMON Manuals