LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Front Seats (2 Of 2)) >> Removal And Installation >> Front Center Seat Backrest - Crew Cab Super Cab >> Removal

Front Center Seat Backrest - Crew Cab Super Cab: Removal

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the front center seat. Refer to: Front Center Seat .
  2. Lift the seat cushion

    1. Release the seat cushion latch.
    2. Lift the seat cushion.

    GFD410804Courtesy of FORD MOTOR COMPANY
  3. Remove the cup holder.
    GFD410805Courtesy of FORD MOTOR COMPANY
  4. Remove screws and the seat storage tray.
    GFD410806Courtesy of FORD MOTOR COMPANY
  5. Lower the seat cushion.
    GFD410807Courtesy of FORD MOTOR COMPANY
  6. Release the seat latch and fold the seat backrest down.
    GFD410808Courtesy of FORD MOTOR COMPANY
  7. Remove the head restraint guide sleeves. Refer to: Front Head Restraint Guide Sleeve .
  8. Remove the rear cup holder assembly.

    1. Release the rear cup holder assembly retainers.
    2. Disconnect the auxiliary power point electrical connector.

    GFD410809Courtesy of FORD MOTOR COMPANY
  9. If equipped. Position the armrest storage compartment lid up.
    GFD410810Courtesy of FORD MOTOR COMPANY
  10. Remove the backrest latch cover.
    GFD410811Courtesy of FORD MOTOR COMPANY
  11. If equipped. Position the armrest storage compartment lid down.
    GFD410812Courtesy of FORD MOTOR COMPANY
  12. Remove the screws, release the retaining clip and remove the RH side shields.
    GFD410813Courtesy of FORD MOTOR COMPANY
  13. Remove the screws, release the retaining clips and remove the LH side shield.
    GFD410814Courtesy of FORD MOTOR COMPANY
  14. Release the seat latch and raise the seat backrest up.
    GFD410815Courtesy of FORD MOTOR COMPANY
  15. Remove the seatbelt anchor bolt.

    Torque:

    35 lb.ft (47 Nm)

    GFD410816Courtesy of FORD MOTOR COMPANY
  16. Remove the backrest.

    1. Remove the stop bolt.

      Torque:

      22 lb.ft (30 Nm)

    2. Remove the pivot bolt.

      Torque:

      33 lb.ft (45 Nm)

    3. Remove the backrest latch upper bolts.

      Torque:

      59 lb.ft (80 Nm)

GFD410817Courtesy of FORD MOTOR COMPANY