LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Exterior Lighting (1 Of 2)) >> Description And Operation >> Exterior Lighting - System Operation and Component Description >> Turn Signal and Hazard Lamps - Incandescent Rear Lamps >> Hazard Lamps

Hazard Lamps

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The BCM sends a voltage signal to the hazard flasher lamp switch to monitor for a hazard lamp function request. When the hazard flasher lamp switch is pressed, the voltage signal is routed to ground, indicating a request to activate or deactivate the hazard lamp function.

When the BCM receives a request for the hazard lamps, the BCM supplies on/off voltage to all the turn lamps.

The timed on/off cycle for the hazard lamps is approximately 70 times per minute, regardless of bulb outage.