Pinpoint Test I : DTC (Diagnostic Trouble Code) U0199:00: Notes
WARNING: This page is about a different car, the 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The SODL communicates with the DDM through the MS-CAN.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0199:00 | Lost Communication With "Door Control Module A": No Sub Type Information | A continuous memory DTC that sets in the SODL when expected messages from the DDM are missing for 2 seconds or more. |
Possible Causes
- Communication network concern
- DDM