LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Rear Drive Axle/Differential - Vehicles With: DANA M275) >> Removal And Installation >> Drive Pinion Seal >> Installation

Drive Pinion Seal: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, install the drive pinion seal. Use Special Service Tool: 205-1018 Installation Tube., 205-1031 Installer, Pinion Seal.
    GFD200580Courtesy of FORD MOTOR COMPANY
  2. Install the drive pinion flange. Refer to: Drive Pinion Flange .
scientia non olet · About LEMON Manuals