Rear Seat Cushion Cover - Super Cab: Removal
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH shown, RH similar.
- Remove the rear seat. Refer to: Rear Seat RH - Super Cab . Refer to: Rear Seat LH - Super Cab .
- Remove the cushion latch handle bezel from the cushion. Use the General Equipment: Interior Trim Remover
- Release the seat cushion cover lower J-clip.
-
NOTE: Use care when separating the seat cushion cover from the hook-and-loop strip or the hook-and-loop strip can be torn from the foam.
Unzip and open the cushion cover. Release the hook-and-loop strips.
- Release the latch cable and route it through the cushion cover.
- Rotate the latch cable end to align with the slot in the lever and pull the cable end through the slot.
- Route the latch cable through the cushion cover.
-
NOTE: Use care when separating the seat cushion cover from the hook-and-arrow strip or the hook can be torn from the foam.
Release the hook-and arrows from the foam and remove the cushion cover.