DTC P242D - Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 3
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
P242D - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT HIGH BANK 1 SENSOR 3
| Description: | This DTC sets when the exhaust gas temperature bank 1, sensor 3 (EGT13) voltage is greater than 4.90 volts for greater than 15 seconds. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. For Transit, drive the vehicle, while carrying out the appropriate drive cycle procedure, until the system warning message has cleared from the instrument cluster message center. Refer to DRIVE CYCLES
for additional information. For all others, drive the vehicle until the warning message has cleared from the instrument cluster message center. An EGT13_V PID value greater than 4.90 volts indicates a concern. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||