LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wheel Hubs And Bearings - Full Floating Axle - DANA) >> Removal And Installation >> Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups >> Removal

Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups: Removal

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Dual Rear Wheel (DRW) hub shown in illustration, Single Rear Wheel (SRW) hub similar.
  1. Remove the wheel hub. REFER to: Wheel Hub .
  2. Remove and discard the wheel hub inner seal.
    GFD200680Courtesy of FORD MOTOR COMPANY
  3. Remove the inner wheel hub bearing.
    GFD200681Courtesy of FORD MOTOR COMPANY
  4. Remove and discard the outer wheel bearing cup.

    Use the General Equipment: Punch

    Use the General Equipment: Copper Hammer

GFD200682Courtesy of FORD MOTOR COMPANY