Pinpoint Tests QB: Keep Alive Power (KAPWR): Introduction
This pinpoint test is intended to diagnose the following:
- battery terminal condition
- KAPWR wire routing
- harness circuit: KAPWR
- powertrain control module (PCM) (12A650)
Powertrain Control Module (PCM) Connector
For PCM connector views or Reference values, Refer to REFERENCE VALUES .
| Vehicle | Connector | Pin | Circuit |
|---|---|---|---|
| Ford GT | 198 PIN | B100 | KAPWR |
| Ranger | 128 PIN | B10 | KAPWR |
| Transit | 306 PIN | B100 | KAPWR |
| All other vehicles | 112 PIN | B10 | KAPWR |