Valve Tappets: Removal

Remove the camshafts. Refer to: Camshaft .
NOTE: If the camshafts and valve tappets are to be reused, mark the location of the valve tappets to make sure they are assembled in their original positions.

NOTE: Lubricate the valve tappets with clean engine oil prior to installation.

Remove the valve tappets.

Courtesy of FORD MOTOR COMPANY
NOTE: The number on the valve tappets only reflects the digits that follow the decimal. For example, a tappet with the number 0.650 has the thickness of 3.650 mm.

NOTE: Install new components as necessary.

Inspect the valve tappets.

Courtesy of FORD MOTOR COMPANY