LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.0L DURATEC-He (110KW/150PS) - Mi4 >> Removal And Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

  1. Remove and discard the crankshaft pulley bolt.
    GFD570266Courtesy of FORD MOTOR COMPANY
  2. NOTE: Remove the through-bolt from the special tool.

    • Lubricate the crankshaft front seal with clean engine oil.

    • Using the special tools, install the crankshaft front seal.

      Use Special Service Tool: 303-096 (T74P-6150-A) Installer, Camshaft Front Oil Seal.

    GFD570267Courtesy of FORD MOTOR COMPANY
  3. Install the crankshaft pulley. Refer to: Crankshaft Pulley .
scientia non olet · About LEMON Manuals