Front Muffler: Installation

Install the front muffler pipe and tighten the clamp.
Torque

: 35 lb.ft (48 Nm)

Courtesy of FORD MOTOR COMPANY
If equipped. Install the center support brace and the bolts.
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
NOTE: Make sure that new components are installed.
1. Apply a thin coating. Install the gasket and position the muffler and tailpipe.
  Material
  
  : Multi-Purpose Grease (SA-M1C9107-A)
2. NOTE: Make sure that new nuts are installed.
  
  Install the nuts.
  
  Torque
  
  : 35 lb.ft (48 Nm)

GFD572687

Courtesy of FORD MOTOR COMPANY