Degas Bottle: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction may result in personal injury.
Slowly turn the pressure relief cap 1/2 turn and step back while the pressure is released
- Remove the pressure relief cap.
-
- Using the general equipment, clamp the lower degas bottle hose.
Use the General Equipment: Locking Pliers
- Syphon the engine coolant from the degas bottle.
Use the General Equipment: Fluid Suction Gun
- Depress the tabs and disconnect the upper coolant tube.
- Using the general equipment, clamp the lower degas bottle hose.
- Release the degas bottle support tabs and position the degas bottle aside.
- Release the clamp, disconnect the lower coolant hose.
Use the General Equipment: Hose Clamp Remover/Installer