LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center And Warning Chimes (1 Of 2) >> Description And Operation >> Warning Chimes - System Operation and Component Description >> Network Message Chart

Network Message Chart

Module Network Input Messages - Instrument Panel Cluster (IPC) 

Broadcast Message Originating Module Message Purpose
Brake pedal applied PCM Input used for the PRNDL not-in-park chime.
Cross traffic alert sensor status-left SODL Input used for the CTA warning chime
Cross traffic alert sensor status-right SODR Input used for the CTA warning chime
Cross traffic alert status-left SODL Input used for the CTA warning chime
Cross traffic alert status-right SODR Input used for the CTA warning chime
Driver door ajar status BCM Input used for the door ajar chime, key-in-ignition chime, headlamps on chime and PRNDL not-in-park chime.
Driver seatbelt buckle status RCM Input used for the seatbelt chime and the Belt-Minder® chime.
Forward collision warning chime request IPMA Input used for the forward collision alert warning chime.
Front park aid chime request PAM Input used for the front park aid chime.
Hood ajar status BCM Input used to wake up the chime modules on the CAN upon the hood status change to open.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Key-in-ignition status BCM Input used for the key-in-ignition warning chime.
Left turn lamp on request BCM Input used for the turn indication tick-tock chime.
Lights on warning chime BCM Input used for the lights on chime.
Parking brake chime request BCM Input used for the parking brake warning chime.
Passenger seat belt buckle status RCM Input used for the seatbelt chime and the Belt-Minder® chime.
Power mode BCM Input used for the key-in-ignition warning chime, PRNDL not in park warning chime and the seatbelt warning chime.
Rear park aid chime request PAM Input used for the rear park aid chime.
Right turn lamp on request BCM Input used for the turn indication tick-tock chime.
Transmission gear display mode PCM (gas)/ TCM (diesel) Input used for the PRNDL not-in-park chime.
Vehicle speed PCM Input used for the following: vehicle speed component of the Belt-Minder® chime vehicle speed component of the turn signal tick-tock chime parking brake warning chime
PRNDL not-in-park chime