Network Message Chart - Indicators

Module Network Input Messages - IPC

Broadcast Message	Originating Module	Message Purpose
ABS warning indicator request	ABS module	Input used to control the ABS warning indicator.
Airbag indicator request	RCM	Input used to control the airbag warning indicator.
Body service required	BCM	Input used to control the powertrain malfunction (wrench) indicator.
Brake (red) warning indicator request	ABS module	ABS input used to control the brake warning indicator.
Brake fluid level warning	BCM	Brake fluid level input used to control the brake warning indicator.
Charging system indicator request	BCM	Input used to control the flashing of the charging system warning indicator.
Cross traffic alert sensor status-left	SODL	Input used to control the BLIS/ CTA warning indicator.
Cross traffic alert sensor status-right	SODR	Input used to control the BLIS/ CTA warning indicator.
Cross traffic alert status-left	SODL	Input used to control the BLIS/ CTA warning indicator.
Cross traffic alert status-right	SODR	Input used to control the BLIS/ CTA warning indicator.
Diesel exhaust fluid level indicator request	PCM	Input used to control the diesel exhaust fluid level low indicator.
Driver door ajar status	BCM	Input used to control the door ajar indicator.
Driver seatbelt buckle status	RCM	Input used to control the seatbelt warning indicator.
Engine coolant temperature	PCM	Input used to control the engine coolant temperature indicator.
Engine over-temperature indicator	PCM	Input used to control the engine coolant temperature indicator.
Engine oil pressure warning indicator	PCM	Input used to control the low engine oil pressure warning indicator.
Engine service required	PCM	Input used to control the powertrain malufunction (wrench) indicator.
Forward collision warning indicator request	IPMA	Input used to control the forward collision warning indicator.
Front fog lamp indicator status	BCM	Input used to control the front fog lamp on indicator.
Glow plug indication	PCM	Input used to control the glow plug (wait to start) indicator.
High beam status	BCM	Input used to control the high beam indicator.
Hood ajar status	BCM	Input used to control the door ajar indicator.
Ignition status	BCM	Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Lane keep assist system status display	IPMA	Input used to control the lane keep assist system indicator.
LH/ RH turn indicator	BCM	Input used to control the RH and LH turn indicators.
Left rear door ajar status	BCM	Input used to control the door ajar indicator.
MIL request	PCM	Input used to control the MIL.
Park lamp status	BCM	Input used to control the lights on indicator.
Parking brake warning indicator	ABS module	Parking brake input used to control the brake warning indicator.
Passenger door ajar status	BCM	Input used to control the door ajar indicator.
Passenger seatbelt buckle status	RCM	Input used to control the seatbelt warning indicator.
Rear cargo door ajar status	BCM	Input used to control the door ajar indicator.
Right rear door ajar status	BCM	Input used to control the door ajar indicator.
Side obstacle detect status - left	SODL	Input used to control the BLIS indicator.
Side obstacle detect status - right	SODR	Input used to control the BLIS indicator.
Side obstacle detect sensor status - left	SODL	Input used to control the BLIS indicator.
Side obstacle detect sensor status - right	SODR	Input used to control the BLIS indicator.
Stability/traction control indicator request	ABS module	Input used to control the stability/traction control indicator (sliding car icon).
Stability/traction control disabled indicator request	ABS module	Input used to control the stability/traction control disabled indicator (sliding car OFF icon).
Stop/start standby indicator	PCM	Input used to control the engine auto stop/start indicator when the engine shuts off.
TPMS indication request	BCM	Input used to control the TPMS indicator
Transmission service required	PCM/ TCM (diesel)	Input used to control the powertrain malfunction (wrench) indicator
Water in fuel indication	PCM	Input used to control the water in fuel indicator when water is detected in the fuel.

Module Network Input Messages - ABS Module

Broadcast Message	Originating Module	Message Purpose
Stability-traction control switch request	IPC	Input used by the ABS to disable or enable the stability-traction control.