Pinpoint Test F: C1001:08: Notes
Refer to Vehicle Emergency Messaging System for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description .
DTC Fault Trigger Conditions - IPMA
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C1001:08 | Vision System Camera: Bus Signal/Message Failure | This continuous memory and on-demand DTC sets in the CCM when the pre-collision assist range status, yaw rate and vehicle velocity messages from the CCM are missing. |
Possible Sources
- Wiring, terminals or connectors
- CCM
- IPMA
- IPC