LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 5.0L 32V Ti-VCT (359KW/486PS) (WU)/5.0L Ti-VCT V8 (343KW/466PS) (MF) >> Removal And Installation >> Cooling Fan Motor and Shroud >> Removal

Cooling Fan Motor and Shroud: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the air cleaner. Refer to: Air Cleaner .
  2. Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .
  3. Remove the bolts and position the degas bottle aside.

    Torque: 80 lb.in (9 Nm)

    GFD717568Courtesy of FORD MOTOR COMPANY
  4. Disconnect the cooling fan electrical connectors and detach the wiring harness retainers.
    GFD717569Courtesy of FORD MOTOR COMPANY
  5. Remove the bolts.

    Torque: 53 lb.in (6 Nm)

    GFD717570Courtesy of FORD MOTOR COMPANY
  6. Remove the cooling fan motor and shroud.
GFD717571Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals