Pinpoint Test Q: Transmission Stuck In Park
WARNING: This page is about a different variant/trim than selected.
- Normal Operation and Fault Conditions
- GSM not communicating with the TCM
- RESOLVE any communication DTCs between the GSM and the TCM.
- Park lock engaging valve
- REFER to: DTC Chart and Pinpoint Tests .
- Park lock hold solenoid
- REFER to: DTC Chart and Pinpoint Tests .
Possible Sources
- Communication error
- Park lock engaging valve
- Park lock hold solenoid
- GSM not communicating with the TCM
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods .