LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Cooling - 5.2L 32V Ti-VCT - Supercharged) >> Removal And Installation >> Thermostat >> Installation

Removal And Installation: Thermostat: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new O-ring seal and lubricate it with clean engine coolant. Refer to: Specifications .
  2. To install, reverse the removal procedure.
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals