LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine - 5.2L 32V Ti-VCT - Supercharged) >> Removal And Installation >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: Lubricate the hydraulic lash adjuster with clean engine oil prior to installation.

    Install the hydraulic lash adjuster.

    GFD716753Courtesy of FORD MOTOR COMPANY
  2. Install the rocker arm. Refer to: Rocker Arm .