LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel Charging And Controls - 2.3L ECOBOOST (231KW/314PS)/2.3L ECOBOOST (257KW/350PS) - Mi4) >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal

Fuel Pump Driver Module (FPDM): Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: The FPDM is located beneath the rear seat cushion on the LH side.
  1. Remove the rear seat cushion. Refer to: Rear Seat Cushion .
    1. Disconnect the FPDM electrical connector.
    2. Remove the FPDM retaining nuts and then remove the FPDM.
GFD717672Courtesy of FORD MOTOR COMPANY