LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Cooling - 2.3L ECOBOOST (231KW/314PS)/2.3L ECOBOOST (257KW/350PS) - Mi4) >> Description And Operation >> Engine Cooling - Component Location

Engine Cooling - Component Location

WARNING: This page is about a different variant/trim than selected.
NOTE: Coolant temperature will vary with ambient temperature and load. Temperatures shown are for ambient temperature of 38° C (100° F). Red arrows indicate a temperature over 90° C (194° F), Orange arrows indicate a temperature of approximately 90° C (194° F), Blue arrows indicate a temperature below 90° C (194° F).
GFD717500Courtesy of FORD MOTOR COMPANY
Item Description
1 Degas bottle
2 Pressure relief cap
3 Turbocharger outlet tube
4 Upper radiator hose
5 Radiator-to-degas bottle hose
6 Radiator
7 Coolant pump
8 Turbocharger inlet tube
9 Turbocharger
10 Engine vent hose
11 Coolant outlet tube
12 Coolant outlet connector
13 Engine block
14 Lower radiator hose
15 Coolant return hose
16 Thermostat housing
17 Coolant bypass hose
18 Coolant bypass connector
19 Cylinder head gasket
20 Cylinder head
21 Heater core inlet hose
22 Heater core
23 Coolant outlet connector adapter assembly
24 Heater core outlet hose
25 Heater core outlet tube