LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.3L ECOBOOST (231KW/314PS)/2.3L ECOBOOST (257KW/350PS) - Mi4) >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal

Intake Air Temperature (IAT) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the IAT sensor electrical connector.
    GFD718061Courtesy of FORD MOTOR COMPANY
  2. Remove the IAT sensor.
GFD718062Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals