LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Abs Guided Routine Testing - Pinpoint Tests B - BZ) >> Abs Pinpoint Tests >> Pinpoint Tests BY: Lost Communication With Parking Assist Control Module "A" >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the PAM sends messages to the ABS module through the GWM over the HS-CAN 1. If the ABS module does not receive these messages within a certain time frame, the module sets DTCs. For information on the messages sent to the ABS module by the PAM, refer to the Network Message Chart in Description and Operation in the Anti-Lock Brake System (ABS) and Stability Control article. 

PPT BY ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0159:00 Lost Communication With Parking Assist Control Module 'A': No Sub Type Information This DTC sets when the ABS module does not receive messages from the PAM in the allotted time. This can be due to a PAM failure, a circuit failure on the network or an excessive load on the network.