LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Abs Guided Routine Testing - Pinpoint Tests B - BZ) >> Abs Pinpoint Tests >> Pinpoint Tests BU: ABS Module CAN Link/Torque Request Error >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

During a traction control event, the ABS module sends a torque request message to the PCM. The PCM responds by reducing engine torque to aid in preventing drive wheel slip. If the PCM does not receive the message or the requested amount of torque is outside programmed parameters, this DTC is set in the PCM. The PCM only monitors for a torque request message during a wheel slip event.