LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Abs Guided Routine Testing - Pinpoint Tests B - BZ) >> Abs Pinpoint Tests >> Pinpoint Tests B: Wheel Speed Sensor Erratic Signal Faults >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The wheel speed sensor uses the tone ring to generate a square wave signal proportional to wheel speed which is sent to the ABS module. The front wheel bearing, rear axle shafts, tone rings and wheel speed sensors must be undamaged and free from any contamination to produce a clean signal for use by the ABS module. Also, all 4 tires and wheels must be of the same manufacturer recommended size for the wheel speed sensor to generate an accurate wheel speed signal.