LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Abs Guided Routine Testing - Pinpoint Tests A - AZ) >> Abs Pinpoint Tests >> Pinpoint Tests AV: ABS Module Communication Concern With The GSM >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the GSM sends messages to the ABS module over the HS-CAN 2. If the ABS module does not receive these messages within a certain time frame (usually less than 1 second), the ABS module sets a DTCs. For information on the messages sent to the ABS module by the GSM, refer to the Description and Operation in the Anti-Lock Brake System (ABS) and Stability Control article. 

PPT AV ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0103:00 Lost Communication With Gear Shift Control Module A: No Sub Type Information Sets in continuous memory and on-demand when any of the GSM messages are missing. This can be due to a GSM failure, a circuit failure on the HS-CAN2 or an excessive load on the network.
U0404:00 Invalid Data Received from Gear Shift Control Module A: No Sub Type Information This DTC sets if the GSM messages received contain an invalid value for longer than the specified time.