LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Abs Guided Routine Testing - Pinpoint Tests A - AZ) >> Abs Pinpoint Tests >> Pinpoint Tests AF: ABS Module VIN Mismatch >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is set to ON, the ABS module and the BCM share VIN information through the GWM over the HS-CAN1 and HS-CAN2. If the ABS module has a different VIN than the BCM due to incorrect module configuration, this DTC sets. 

PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U3002:62 Vehicle Identification Number: Signal Compare Failure Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN, does not match the VIN stored in the ABS module.
scientia non olet · About LEMON Manuals