LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Abs Guided Routine Testing - Pinpoint Tests D - ZA) >> Abs Pinpoint Tests >> Pinpoint Tests OC: The Snow/Sand Mode Feature Is Inoperative, Cannot Be Disabled Or Enabled >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2024 Ford F-550 Super Duty, 2024 Ford F-450 Super Duty, 2024 Ford F-350 Super Duty, 2024 Ford F-250 Super Duty, and 2023 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The mode select switch is used to activate and deactivate the snow/sand mode feature. When the driver presses the mode select switch, the HVAC module receives a ground signal from the switch. The HVAC module sends a mode select switch message to the ABS module over the HS-CAN 2 and the ABS module takes the necessary action depending on the switch inputs.