Symptom Chart(s)
Symptom Chart: Parking Aid
| Condition | Actions |
|---|---|
| A module does not communicate with the diagnostic scan tool | REFER to: Controller Area Network (CAN) Module Communications Network . |
| The audible parking aid is inoperative | GO to Pinpoint Test A |
| Continuous or intermittent tone when no obstacles or fault codes are present | GO to Pinpoint Test R |
| The parking aid audio tones are inoperative | GO to Pinpoint Test A |
| The parking aid switch is inoperative or does not operate correctly | GO to Pinpoint Test D |
| The parking aid disable switch LED is inoperative or always on | GO to Pinpoint Test E |
| The reverse brake assist is inoperative or does not operate correctly | REFER to: Blind Spot Information System . |
| Sensor blockage | GO to Pinpoint Test R |
| The parking aid menu is not available in the message center and cannot be deactivated | Normal operation. |