Pinpoint Test J: Transfer Case Whine - Noise At All Ranges
WARNING: This page is about a different variant/trim than selected.
- Normal Operation and Fault Conditions
- CHECK that the transfer case is filled to the correct level and with the specified fluid. REFER to: Fuel System - Overview
- DISASSEMBLE the transfer case. CHECK the oil pump for wear or damage. REPAIR as necessary.
- CONFIRM that the tires and wheels are correct for the vehicle. CHECK that the tire inflation pressures are correct.
Possible Sources
- Incorrect fluid level or fluid quality
- Worn oil pump
- Under-inflated or oversized tires
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods