Pinpoint Test V: B115E:55 - Rear Parking Aid Camera Module Not Configured
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the BCM when the rear parking aid camera is not configured. IPMA B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the IPMA when the rear parking aid camera is not configured. Possible Sources
- Rear parking aid camera initialization
- V1 CARRY OUT THE PARKING AID CAMERA INITIALIZATION USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, CARRY OUT the parking aid camera initialization procedure. REFER to: Parking Aid Camera Initialization .
Did the parking aid camera initialization procedure complete successfully?
Yes The system is operating correctly at this time. No REFER to the parking aid camera initialization procedure to troubleshoot the concern. REFER to: Parking Aid Camera Initialization .