Pinpoint Test R: B115E:49 Or B115E:96 - Module Internal Failure
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA B115E:49 Camera Module: Internal Electronic Failure Sets in continuous memory and on-demand in the IPMA when an internal fault is detected in the rear parking aid camera. IPMA B115E:96 Camera Module: Component Internal Failure A continuous and on-demand DTC that sets in the IPMA when the rear parking aid camera has an internal failure. Possible Sources
- Rear parking aid camera
- R1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMA (IMAGE PROCESSING MODULE A) SELF-TEST
- Ignition ON.
- Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using the diagnostic scan tool, CARRY OUT the IPMA self-test.
Is DTC B115E:49 or B115E:96 retrieved?
Yes INSTALL a new rear parking aid camera, REFER to: Rear Parking Aid Camera . No The system is operating correctly at this time.