Symptom Chart: Active Park Assist
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not communicate with the diagnostic scan tool | Fuse Wiring, terminals or connectors Module |
REFER to: Controller Area Network (CAN) Module Communications Network . |
| The active park assist system does not activate when the switch is pressed | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The centerstack infotainment display and/or the IPC message center display shows an active park assist fault message | Refer to the Pinpoint Test | GO to Pinpoint Test I |
| The centerstack infotainment display shows the active park assist not available message | Refer to the Pinpoint Test | GO to Pinpoint Test J |
| The active park assist system does not position the vehicle correctly | Refer to the Pinpoint Test | GO to Pinpoint Test K |
| The active park assist system does not offer available parking spaces | Refer to the Pinpoint Test | GO to Pinpoint Test L |
| The centerstack infotainment display shows POA NOT AVAILABLE when the turn signal is used during a parallel park out assist maneuver | Refer to the Pinpoint Test | GO to Pinpoint Test M |
| The active park assist system does not offer the parallel park out assist feature | Refer to the Pinpoint Test | GO to Pinpoint Test N |