LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Escape SEL Plug-In Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG) >> Removal And Installation >> Radiator >> Installation

Removal And Installation: Radiator: Installation

  1. To install, reverse the removal procedure.
  2. Install and lubricate new condenser fitting O-ring seals. Refer to: Specifications . .
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . .
  4. Fill and bleed the electric powertrain cooling system. Refer to: Cooling System Filling and Bleeding . , General Procedures).
  5. Check and fill the transmission fluid as necessary. Refer to: Transmission Fluid Level Check . .
scientia non olet · About LEMON Manuals