LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Escape SEL Plug-In Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG) >> Removal And Installation >> Cooling Module >> Installation

Cooling Module: Installation

  1. To install, reverse the removal procedure.
  2. Install and lubricate new condenser fitting O-ring seals. Refer to: Specifications .
  3. Evacuate, leak test and charge the A/C system. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R1234YF Refrigerant Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R134A Refrigerant .
  4. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding  .
  5. Fill and bleed the electric powertrain cooling system. Refer to: Cooling System Filling and Bleeding .
  6. Check and fill the transmission fluid as necessary. Refer to: Transmission Fluid Level Check .
scientia non olet · About LEMON Manuals