Pinpoint Test Ah: The DTE (Distance To Empty) /Average Fuel Economy (AFE) Display Is Inoperative

Normal Operation and Fault Conditions
REFER to: Message Center - 3.5L Duratec (202kW/275PS)/3.5L EcoBoost (235kW/320PS) - System Operation and Component Description .

Possible Sources
- Communication concern
- IPC

AH1 VERIFY OPERATION OF THE FUEL GAUGE
- Ignition ON.
- Verify operation of the fuel gauge.
Does the fuel gauge operate properly?

Yes GO to AH2

No GO to Pinpoint Test B

AH2 VERIFY OPERATION OF THE SPEEDOMETER
- Verify operation of the speedometer.
Does the speedometer operate properly?

Yes GO to AH3

No GO to Pinpoint Test C

AH3 VERIFY OPERATION OF THE ODOMETER
- Verify operation of the odometer.
Does the odometer operate properly?

Yes INSTALL a new IPC. Refer to INSTRUMENT PANEL CLUSTER (IPC) .

No GO to Pinpoint Test E