Pinpoint Test I: B115E:55
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the BCM when the rear parking aid camera is not configured. Possible Sources
- Rear parking aid camera initialization
- I1 PERFORM THE 360 DEGREE VIEW CAMERA ALIGNMENT USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, perform the parking aid camera initialization procedure. REFER to: Parking Aid Camera Initialization .
Did the parking aid camera initialization procedure complete successfully?
Yes The system is operating correctly at this time. No REFER to the parking aid camera initialization procedure to troubleshoot the concern. REFER to: Parking Aid Camera Initialization .