Driver Door Window Operation

The driver door window control switch contains electronics that control the one-touch up/down operation. The driver door window control switch receives feedback from the Hall-effect sensors which are integral to the driver door window regulator motor. If the Hall-effect sensors or any associated circuitry fails, the window still operates but the one-touch up/down and obstacle detection is inoperative.

If an obstacle has been detected in the window opening as the window glass is moving upward, the window motor automatically reverses direction and moves the glass toward the bounce-back position.

To override a bounce-back condition (for example, to overcome the resistance of ice on the window or seals), close the window glass twice until it reaches the resistance and allow it to reverse to the bounce-back position. On the third attempt, activate and hold the master window control switch in the UP position. The window travels up with no bounce-back protection.