Driver Door Window Control Switch

The driver door window control switch and the driver door window regulator motor each contain integral electronics which must be initialized whenever:

• a new driver door window control switch is installed.
• a new driver door window regulator motor is installed.
• a new driver door window glass is installed.
• carrying out any operation in which grease or lubricants are applied to the driver door window system.
• battery voltage has been removed from the driver door window control switch for more than 3 minutes (for example, battery or window control switch disconnected).

Refer to: Power Door Window Initialization .

The driver door window control switch:

• contains integral electronics to control the one-touch up/down operation of the driver door window.
• supplies high current voltage and ground directly to the driver door window regulator motor to move the window upward and downward.
• supplies high current ground circuit for the passenger door window operation.