LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Bronco Raptor >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Transfer Case - 4X4 With Part Time Engagement - Manual) >> Removal And Installation >> Transfer Case Input Shaft Seal >> Removal

Transfer Case Input Shaft Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transfer case. Refer to: Transfer Case .
  2. Remove the input shaft seal. Use Special Service Tool: 308-375 Remover, Input Shaft Seal., 100-001 (T50T-100-A) Slide Hammer.
GFD626605Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals