Transfer Case: Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations, refer to OEM COLOR CODING

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	205-090 (T75L-1165-B)Plate, Bearing/Oil Seal
Courtesy of FORD MOTOR COMPANY	205-126 (T78P-4851-A)Holding Fixture, Drive Pinion Flange
Courtesy of FORD MOTOR COMPANY	205-153 (T80T-4000-W)Handle
Courtesy of FORD MOTOR COMPANY	205-199 (T83T-3132-A1)Installer, Spindle/Axle ShaftT83-4000-A \| TKIT-1983-F \| TKIT-1983-FLM \| TKIT-1983-FX
Courtesy of FORD MOTOR COMPANY	307-181 (T87C-77000-D)Installer, Transaxle Bearing ConeT88C-1000-T \| TKIT-1988-TRACER \| TKIT-1989-F
Courtesy of FORD MOTOR COMPANY	307-344 (T95P-7H150-A)Installer, Driven Sprocket Wheel \| TKIT-1995-F \| TKIT-1995-FM/FLM \| TKIT-1995-LM/M
Courtesy of FORD MOTOR COMPANY	308-047 (T77F-1102-A)Remover, Bearing Cup
Courtesy of FORD MOTOR COMPANY	308-375Remover, Input Shaft Seal \| TKIT-2005U-M \| TKIT-1999-F/FLM/LT
Courtesy of FORD MOTOR COMPANY	308-410Installer, Output Shaft Front Bearing \| TKIT-1999-F/FLM/LT
Courtesy of FORD MOTOR COMPANY	308-430Installer, PTO Drive Gear Outer Oil Seal \| TKIT-2001-FLM \| TKIT-2001-ROW \| TKIT-2002N-LM \| TKIT-2002-M
Courtesy of FORD MOTOR COMPANY	308-431Installer, Halfshaft Oil Seal \| TKIT-2001-FLM \| TKIT-2001-ROW \| TKIT-2002N-LM \| TKIT-2002-M
Courtesy of FORD MOTOR COMPANY	308-614Installer, Output Shaft Seal
Courtesy of FORD MOTOR COMPANY	308-976Installer, Output Shaft Seal
Slide Hammer
Hydraulic Press
Adjustable Mounting Arm
Puller
Spatula
Bearing Separator

Materials

Name	Specification
Motorcraft® Ultra Silicone SealantTA-29	WSS-M4G323-A8