Turbocharger Oil Supply Tube RH: Installation

NOTE: A new turbocharger oil supply tube filter must be installed. Failure to install a new filter will cause turbocharger failure.

NOTE: Left side shown, right side is similar.

Install the new turbocharger oil supply tube oil filter.

Courtesy of FORD MOTOR COMPANY
1. NOTE: Do not use a metal brush; damage to sealing area will result in leaks.
  
  Carefully use a nylon brush to remove the old seal residue, use brake cleaner to rinse the seal residue out of the turbocharger tube to turbocharger bore and the turbocharger tube to engine bore. Inspect the area for deep scratches and gouges. Install new components as needed.
  
  Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
2. Install the new the seals. Lubricate the inner seal surface with clean engine oil. Refer to: LUBRICANTS, FLUIDS, SEALERS AND ADHESIVES .
Courtesy of FORD MOTOR COMPANY
NOTE: When installing the turbocharger oil supply tube into the engine block, use care not to damage the new turbocharger oil supply tube oil filter.
1. NOTE: Do not use a metal brush; damage to sealing area will result in leaks.
  
  Carefully use a nylon brush to remove the old O-ring residue and use brake cleaner to rinse the O-ring residue out of the turbocharger tube to turbocharger O-ring bore and the turbocharger tube to engine O-ring bore. Inspect the area for deep scratches and gouges. Install new components as needed.
  
  Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
2. Install the turbocharger oil supply tube, then install and tighten the turbocharger oil supply tube bolts.
  Torque: 89 lb.in (10 Nm)
Courtesy of FORD MOTOR COMPANY
Install the turbocharger outlet pipe RH. Refer to: TURBOCHARGER OUTLET PIPE RH .
Install the air cleaner outlet pipe RH. Refer to: AIR CLEANER OUTLET PIPE RH .
Install the right front fender splash shield. Refer to: FENDER SPLASH SHIELD .
Check and top off the engine oil level as needed. Refer to: ENGINE OIL .