LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Transit-250 Base, Van Cargo Extended, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center And Warning Chimes (2 Of 2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test By: U2100:00

Pinpoint Test By: U2100:00

  1. DTC Fault Trigger Conditions 
    DTC Description Fault Trigger Condition
    IPC U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets in the IPC due to incomplete or incorrect PMI procedures.

    Possible Sources 

    • IPC

  2. BY1 CHECK VEHICLE HISTORY FOR RECENT SERVICE ACTIONS

    • Check the vehicle history for any recent service actions related to the IPC.

    Have any service actions been performed? 

    Yes  REPEAT the PMI as directed by the diagnostic scan tool.
    No  GO to  BY2

  3. BY2 RECONFIGURE THE MODULE

    • Using a diagnostic scan tool, perform the PMI as directed by the diagnostic scan tool.

    • Verify the IPC functions correctly.

    Does the IPC function correctly? 

    Yes  The system is operating correctly at this time. The concern may have been caused by incomplete or incorrect PMI procedure.
    No  The IPC fails to retain configuration data. Install a new IPC. Refer to Instrument Panel Cluster (IPC) .
scientia non olet · About LEMON Manuals