Pinpoint Test Ah: The DTE (Distance To Empty) /Average Fuel Economy (AFE) Display Is Inoperative
- Normal Operation and Fault Conditions
REFER to: Message Center - System Operation and Component Description .
Possible Sources
- Communication concern
- IPC
- AH1 VERIFY OPERATION OF THE FUEL GAUGE
- Ignition ON.
- Verify operation of the fuel gauge.
Does the fuel gauge operate properly?
Yes GO to AH2 No GO to Pinpoint Test B - AH2 VERIFY OPERATION OF THE SPEEDOMETER
- Verify operation of the speedometer.
Does the speedometer operate properly?
Yes GO to AH3 No GO to Pinpoint Test C - AH3 VERIFY OPERATION OF THE ODOMETER
- Verify operation of the odometer.
Does the odometer operate properly?
Yes Install a new IPC. Refer to Instrument Panel Cluster (IPC) . No GO to Pinpoint Test E