Pinpoint Test Bu: U2200:00 Or U3000:44
- DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPC U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Sets in the IPC due to non-volatile memory (NVM) failure. IPC U3000:44 Control Module: Data Memory Failure Sets in the IPC when the IPC detects non-volatile memory (NVM) odometer failure. Possible Sources
- IPC
- BU1 RETRIEVE IPC (INSTRUMENT PANEL CLUSTER) DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the IPC self-test.
Is U2200:00 or U3000:44 recorded?
Yes INSTALL a new IPC. Refer to Instrument Panel Cluster (IPC) No The system is operating correctly at this time.